Motor Grader Blades Manufacturer and supplier in Hyderabad
A motor grader is a construction machine with a long, blade-like implement at its front end that is used to create a level surface during the grading process. The grader’s blade is also used to cut through grass, small bushes, and trees, as well as remove debris from the site. Motor graders are manufactured in many different sizes, but most have six wheels and weigh between 20 and 30 tons.
The blade of a motor grader is made up of two parts: the moldboard and the cutting edge. The moldboard is the horizontal plate that supports the cutting edge and comes in various sizes and shapes depending on the manufacturer. The cutting edge is the replaceable wear part that actually does the work of grading and scraping. It is usually made of hardened steel and can be either straight or curved.
Positioning the Blade in the Right Way
There are three things to consider when positioning the blade on a motor grader: the type of soil, the depth of the cut, and the slope of the land.
For most projects, a standard U-blade is adequate. The key is to make sure that the cutting edge is positioned correctly.
If you’re working with soft soil, Position the blade so that about two-thirds of its width is in front of the tractor’s rear wheels. This will help prevent the blade from digging too deeply and becoming bogged down.
For deeper cuts, move the blade closer to the front wheels. Conversely, for shallower cuts, move it back towards the rear wheels.
Finally, be mindful of the slope of the land. If you’re cutting across a slope, position the blade so that it’s level with the ground. This will help prevent accidental gouging or erosion.
Replace the Blade When Necessary
It is important to replace the blade on a motor grader when it becomes worn down. A new blade will help the machine to work more efficiently and smoothly.
There are a few signs that it is time to replace the blade on your motor grader. First, take a look at the cutting edge of the blade. If it is cracked, chipped, or otherwise damaged, it needs to be replaced. Additionally, if the blade is not sitting level with the rest of the machine, it needs to be replaced. Finally, if the machine is leaving ruts in the ground or otherwise not working as well as it should, a new blade may be necessary.
If you are unsure whether or not your motor grader needs a new blade, consult with a professional. They will be able to tell you for sure and can also help you choose the right replacement blade for your machine.
Bonai Engineering PVT. LTD. is a leading Motor Grader Blades Manufacturer in Hyderabad. Contact us to get the best quality of products with cost-effective price.